NOTE: The instructions given below apply to the installation of a Bruno top landing gate on a Bruno lift. If installing a top landing gate other than a Bruno gate, refer to the instructions provided by the gate manufacturer. Prior to the installation of either a Bruno and or a non-Bruno top landing gate, check local codes and regulations in force. File Name: Bruno Joey Lift Installation Manual.pdf Size: 4874 KB Type: PDF, ePub, eBook Category: Book Uploaded: 2020 Nov 20, 19:31 Rating: 4.6/5 from 856 votes. The Joey®, using Bruno’s tried and true rack and pinion technology, has the fastest in and out time of any platform lift on the market. The Joey® is the only interior platform scooter lift to be voluntarily tested by an independent lab to show that it meets or exceeds federal motor vehicle crash test standards.

If you use a scooter to help you get around, you already know how wonderful it is for your personal mobility. Being able to transport your scooter by car can be troublesome, however, as most scooters are too heavy for the average person to lift. Fortunately, there are several scooter-lift companies that can make traveling with your scooter a relatively simple task. Installing a scooter lift such as the Bruno VSL-670 requires a careful, deliberate approach to ensure its perfect placement.

Decide where to install your scooter lift. The Bruno VSL-670 has an L-shaped base that must be bolted down to the floor of your vehicle. The area must be large enough to accommodate both lift and scooter. Part of the installation process will require that several holes be drilled in the vehicle floor, so inspect the area carefully to ensure that this will be possible and that no wires or other important components, such as the gas tank, will be compromised by the work. Confirm that there is enough height for the lift to function, and that the boom will be able to swing out and return with your scooter attached.

Set the base of the lift into place inside your vehicle and prepare to mark the location where the bolt holes will be drilled. The lift has two legs that join in a 90-degree angle at the base of the lift. Adjust the length of each leg as necessary to allow a proper fit. Once you are satisfied that the lift is stable and that the holes can be drilled safely, use the felt-tip marker and mark the places where the holes must be drilled. Note that there will be three holes: one at the base of the lift, and one at the ends of each leg. Remove the base. Drill three holes at the marked locations using the electric drill and an appropriate bit. Be certain, before you drill, that the hole can be safely made without damaging anything beneath. Install the lift and, using a socket and the ratchet, insert the bolts through the holes and tighten them.

Connect the wires. Locate the red wire and use the wire-crimping tool and a suitable crimp to attach it to the vehicle's electrical system. Locate the black wire and ground it to the chassis. Once the connections are complete, test the operation of the scooter lift to ensure that it is fully functional.

Tip

• Many scooter lift companies offer a battery power pack option, which may allow you to operate your lift without wiring it to your vehicle's battery.

Tip

Joey By Bruno Installation Manual Pdf

• Drilling into the floor of your vehicle is dangerous if you don't know what is underneath. Always do a visual inspection to ensure the hole can be made without damaging your car.

Joey By Bruno Installation Manual 2017

About the Author

Joey By Bruno Installation Manual Instructions

Art Smithers is a Florida lawyer who was admitted to the bar in 1985. Now a professional writer, his experience and background include work in business, corporate, estate, juvenile, appellate and family law. Smithers is board-certified in the state of Florida.