Microsoft Network Adapter Multiplexor Enable

Microsoft Network Adapter Multiplexor Protocol (NdisImPlatform) Service Defaults in Windows 10

Network adapter multiplexor driverMicrosoft

Microsoft Network Adapter Multiplexor Protocol.

Default Settings

Startup type:Manual
Display name:Microsoft Network Adapter Multiplexor Protocol
Service name:NdisImPlatform
Service type:kernel
Error control:normal
Path:%SystemRoot%System32driversNdisImPlatform.sys
Registry key:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesNdisImPlatform
Protocol

Default Behavior

Microsoft Network Adapter Multiplexor Protocol is a kernel device driver. In Windows 10 it is starting only if the user, an application or another service starts it. If Microsoft Network Adapter Multiplexor Protocol fails to start, the failure details are being recorded into Event Log. Then Windows 10 will start up and notify the user that the NdisImPlatform service has failed to start due to the error.

Can' T Enable Microsoft Network Adapter Multiplexor Protocol For Mac- Applies to: Windows Server (Semi-Annual Channel), Windows Server 2016. Jan 11, 2017 You can't use the windows driver for teaming because doesn't contain multiplexer protocol. Proposed as answer by Cartman Shen Microsoft contingent staff Wednesday, January 11, 2017 3:38 AM. The Microsoft Network Adapter Multiplexor protocol is checked in the teamed network adapter and unchecked in the physical network adapters that are part of the NIC Teaming. For example, if there are two physical network adapters in a team, the Microsoft Network Adapter Multiplexor protocol will be disabled for these two physical network. The Microsoft Network Adapter Multiplexor Protocol service is a kernel mode driver. This protocol is used for Netword Interface Card bonding, which is the combining of two ethernet cards to appear as one physical device in order to increase the available bandwidth. You just leave it by itself if you don't combine Ethernet. I am trying unsuccessfully to enable the Microsoft Network Adapter Multiplexor Protocol in my Ethernet Properties for Realtek Gaming GbE Family Controller. I need this to reduce the drop-offs I get with several ethernet connected radios I use. The prompts ask for the disk, which I do not have (or do not know where it is in my computer). Apr 08, 2015 Create a Name for the Virtual Switch. Select External Network. Click on the Microsoft Network Adapter Multiplexor Driver. Verify that the “Enable virtual LAN identification for management operating system” is checked. Then Click Apply and OK.

Restore Default Startup Configuration for Microsoft Network Adapter Multiplexor Protocol

1. Run the Command Prompt as an administrator.

Microsoft Network Adapter Vista

2. Copy the command below, paste it into the command window and press ENTER:

Network

sc config NdisImPlatform start= demand

Microsoft Network Adapter Multiplexor Setup

3. Close the command window and restart the computer.

Microsoft Network Adapter Multiplexor Enable Windows 10

The NdisImPlatform service is using the NdisImPlatform.sys file that is located in the %WinDir%System32drivers folder. If the file is changed, damaged or deleted, you can restore its original version from Windows 10 installation media.